Innovitech X Filter 1.7

The X filter from Innovitech is a UK designed premium digitally controlled automatic roll filter, a highly effective water particulate filtration unit. Primarily for use in marine, tropical and freshwater aquariums to replace the use of filter socks and floss. This can be used in large display and coral propagation systems too.
The X-Filter has the capability to filter down to 9 microns with the advantage that all filtered particles are removed from the water achieving active nutrient control. Filter section is fully sealed, giving YOU the choice of whether to bypass water or not.

A a real world test program has been in effect since early 2017, the X-filter has been installed in various Marine set ups and the participants have all reported outstanding positive results. Filter roll is 65 meters (213 ft) long available in 9, 17, 25 and 32 micron. Filter out organic waste, detritus, food, micro algae, substrate dust and other unwanted waste.

X-Filter Model 1.7 can handle flow rates in excess of 10,000 litres per hour depending on which grade of media is being used.

Why use the X-Filter

Stunning water clarity
Lower Nutrients P04 and NO3
Lower overall aquarium maintenance
Clearer water better light penetration
Continually removes particles out of the water
Lower detritus in the sump and equipment
Fine tune the level of filtration you want

What's different

Best footprint to flow ratio
No hard plumbing required, drop your drains into the back of the filter
Industrial grade optical water level sensor
65 meter ( 213 ft) compact media rolls
Four grades of media, 9,17,25 and 32 micron.
Modular design for easy installation/maintenance.
Pre assembled for your convenience
Filter panel design uses physics and precision to achieve highest possible flow rates.
Unique Vortex generating water bypass system. ( 2 on 1.0 & 3 on 1.7 model)
Ripple/wave compensation of the optical level sensor.
Each model has a dedicated large motor
Spring loaded design which allows easy removal of used media.
Adjustable filter media section to fit the unit in tight spaces and corners.
Hang on design with removable lower back support to fit on different sump glass thicknesses.

More Features

Very High volume filtration to flow capacity
Fully sealed Filter section – Gives YOU the choice to bypass water or not
Vortex Generators “sling” detritus at the roll maximum efficiency
Entirely replaces the need for filter socks / filter floss
Green LED run light
Blue engagement and alarm LED light
Multiple installation Orientation options
Additional push button for fleece advance built in
Reef safe fleece material
Low-odour fleece material
Integrated fail-safe overflow
Virtually no pluming restrictions
Completely removes waste from the water without odour
X Filter 1.7

Overall Size ( H x W X D ) – 43cm x 30cm x 25cm (42cm height with media) Mounting Hooks 10mm thick glass max
Top section positioning (Width) – +/- 3,5cm (shift right or left from centre) 7cm end to end
Sensor type – Optical digital sensor – Industrial grade
Rated flow (estimated, media grade dependent) – 10,000 lph
System volume (estimated, bioload, media grade dependent) – 2,500 litres (Marine reef)
Media grades (4 grades available) – 9 micron, 17 micron, 25 micron, 32 micron
Fleece media length – 65 meters 213 ft (all micron grades)
Plumbing options (no permanent plumbing require, simply drop in standpipes in overflow section) – Up to 3x 40mm or Up to 2x 50mm
Vortex generating bypass controllers (to fine tune media consumption based on nutrient control) – x3
Alarm – Yes, visible flashing LED (red), audible overflow Alarm will set off if media gets jammed/blocked or sensor too dirty
Self-cleaning function – Yes, water will overflow but without the alarm LED

32 Micron Roll included

Your cart is empty

All Products from All Things Aquatic

Filters

Innovitech X Filter 1.7